KESTREL Series power amplifier
Just like Kestrel, BOWAY KESTREL Series professional power amplifier is designed with special features to meet the requirement of professional sound contractors by providing them power, fast response and accurate sound. With these features, KESTREL Series professional power amplifier is ideal solution for permanently installed sound systems. KESTREL Series amplifier was designed based on Type AB output circuit cope with excellent quality components - "Senkan" transistors which provides the maximum power to 1900W with extra low distortion.
 
KT-650 - 650W/8ohm, 1000W/4ohm
KT-550 - 550W/8ohm, 820W/4ohm
KT-450 - 450W/8ohm, 680W/4ohm

click for lager view
 

Technical Specifications

Type AB output circuit
Full short circuit protection, Opern circuit protection
Overheat & overload protection
Peak power limiter
Clip indicator, Soft start
Dual speed fan motor cooling system
Input sensitivity selector, mono/bridge/parallel selector
Input connectors : 6.35mm phone jacks, XLR connectors
Output connectors : Neutrik speakon 4, Versatile binding post

Output power:

KT-650 : 650W/8ohm, 1000W/4ohm, 1900W/8ohm bridged, 1900W/parallel
KT-550 : 550W/8ohm, 820W/4ohm, 1600W/8ohm bridged, 1900W/parallel
KT-450 : 450W/8ohm, 680W/4ohm, 1350W/8ohm bridged, 1350W/parallel
Frequency response : 10Hz to 50kHz (-1.5dB)
Input sensitivity : 0.77V/26dB/1.4V
Max. voltage input : 21dB/9V
Imput impedance : 20kohm(bal.) 10kohm(unbal.)
Signal to noise ratio : >90dB(KT-450), >95dB(KT-550), >98dB(KT-650)
Crosstalk (8ohm 1kHz) : >70dB
Damping factor(F<=1kHz 8ohm) : >650(KT-450), >700(KT-550), >800(KT-650)
Slew rate : 35V/us(KT-450), 45V/us(KT-550), 50V/us(KT-650)
AC input voltage : 115V/230V selectable 50-60Hz
Dimension(mm) : 482(W) x425(D) x132(H)
Weight(kg) : 26.7(KT-450), 28.3(KT-550), 29.5(KT-650)
BlueMax, BalmerEventTechnics, Seidenfadenstr. 39, CH-3800 Unterseen, Phone: +41 (0)33 8210740, Fax: +41 (0)33 8210742
Email: info@event-technics.com